AtomRC Dolphin Pro Flush Motor Mount - light & removable

Remix from svrline great job.

Major differences from original design are:

• "one piece" design for better motor mount rigidity
• removable , using 0.5mm epoxy sheet as wing frame interface, and m2 flat head screw. epoxy sheet need to be glued into wing frame EPP.
• better motor basement cooling & better airflow from FC trap: allow air to flow on the bottom of the stator

Some parts of the 3mf are used as modifier volume with prussaslicer, to optimize the material distribution
Estimated weight : 84g
To be used with 8s 21700 pack, 80a esc, AOS Supernova 3220 motor 1000kv or 925kv (from rcinpower) , 8x5 to 8x8 propeler.

All print settings & support are set inside 3mf file (to be used with prussaslicer 2.9.x)

Using PA12-GF filament , white.