3d tracking markers for 3d scanners

These trackers have placement points for tracking markers (10mm external diameter, 6mm inner diameter reflector) and holes for 6mm wide and 2mm thick magnets. The ones labeled with threaded have a 1/4 20 thread cut into the design so that you can easily attach it to tripods and things. The triangle and pentagon tracker is used to prop up things that you are scanning. The round tracker is good for any scanning things that need a lot of scanner movement. Each tracker offers multiple surfaces and angles to place your tracking stickers on. Allowing for higher accuracy when tracking.

NO SUPPORTS NEEDED, PRINT IN PLACE (unless you are a perfectionist, in which you can just print a bit slower and be fine on the sticker studs.)