GMKTec EVO-X2 - Horizontal Stand/Riser

A very basic, functional horizontal stand for the GMKTec EVO-X2. This is designed to allow you to place horizontally without covering or impeding airflow to the left side (now bottom side) fan intake and exhaust. It's not pretty, but it is quite effective. With this stand, temperatures under consistent load after ~30 minutes remain in the low-to-mid 60s Celsius. All ports and rear exhaust panels remain fully unobstructed and usable.

The included 3mf is for Creality K1 Max, if you are printing from the STL, scale to 101% for a perfect, snug fit. Requires supports.