Octobase Project for Necromunda - Bridge Support

This is an addon to my original Octobase Project found here: https://www.thingiverse.com/thing:6052281

I designed this so I could extend the length of my bridges without having to print one really long bridge (build plate limitations). With this support you can put a bridge on either end and string them together as long as you would like. This support is what is holding up the bridge in the image above.

There are 3 pieces to this kit: the riser, the connector, and the supports (feet). Print 1 riser, 1 connector, and 2 supports. The riser should friction fit into the supports and the bridge connector will sit loosely on top of the riser. Once you put the bridges on it all fits together nicely and will be stable.

I made several versions of this bridge support and got all mixed up on my computer. This SHOULD be the right combo. If you print it out and it doesn't fit right, let me know in the comments and I will look again and upload the correct pieces. Also, if you print it, post a make so I can see everyone enjoying this system.

I hope that all made sense. Enjoy this bridge extender and happy Wargaming!