Dust Shoe For 43mm Spindle (AMB)

Hey, I got a Stepcraft CNC router with a AMB spindle and I could not find any suitable model for the dust shoe so here is my model.
It is inspired by https://www.thingiverse.com/thing:4363109.

For this build you need 3x5mm magnets.

• one M5/M4 bolt and nut to tight it up.

The diameter of the vacuum hose is to fit one of the fittings from my Makita vacuum cleaner.

I am adding the Fusion file so you can adjust it for your needs. (I hope you will be able - this is my first time exporting to 3df), so you can adjust to your magnet size, your vac diameter, yours size of brush etc.

These were the used magnets and for me - even though they are small - it feels solid. I need to test it, but they seem solid:
3x5mm neodymium magnets - do the search yourself :D 3 in height, 5 in diameter!

This was the dust brush I used:
https://www.amazon.se/-/en/dp/B0B8HD612F?psc=1&ref=ppx_pop_dt_b_asin_title

Magnets need to be inserted with applied force either by press or using pliers or vice. Impro-vice! :D