Vertical dji osmo action 5 sock for generic 5-7 inch carbon quad

built this case for the dji action 5 when used on a 5 or 7 inch aliexpress generic quad carbon frame, as i was learning to fly i desgned this model to fully protect the camera on an eventual crash, i had a few crashes before and left the camera easily exposed in the case of any crash, this cameras have dual screens and are very exposed to a prop hitting the camera if a crash occurs, is not a lightweigh focused design but it totaled a few less grams when compared to the gopro mount and its vertical protective case that i was using before as well as a bit of a lower center of gravity as i also made it shorter to the gopro mount alternative.

The big hole is to being able to fit an nd filter tightly

Lose bag design would require a bit of a sponge material something like a 2cmx2cmx5cm sponge bar fitted on the left side when looking at the camera from the front, this is to secure the camera and also reduce vibrations to the camera

its not a design to quickly release the camera instead focused on protection, it isnt so hard to extract once you get used to it, but i made sure it wouldnt just come out if doing flips and rolls

sure there are tons of other models, but had to make my own, not a very experienced pilot to trust the camera to my skills