Wedge hanging Bracket for cyclone

Hanging bracket you merge into your top during print to adds a hanging wedge mount for the cyclone. Allows for easy removal.

Merge the FEMALE wedge into the sidewall before printing. I hang it from just the lower, but you could cast it into both in case you decide to do both at a later time.

The female has a plate on it so I could insert T-Nuts and screw it in from the other side. There are 4 screw mount holes in the corners to just screw it to something.

Also take a moment to make sure you have the FEMALE wedge properly oriented with the WIDER side towards the BOTTOM of the cyclone (away from the plate during printing).

Note: Be sure to MERGE so the slicer treats them as one part (indicating your overlap is sufficient).

The wedges do not lock, but they do provide a secure resting connection to hang the cyclone... I guess a lock could be added to the top.

Mine are all printed in PETG with a .6 nozzle.

Also included:

• blaster output side... I used a 1.5" pool hose.
• Vacuum side, connection for a 2.25" hose. I printed it at 58mm and it is snug... so I am including a 60mm..

Thanks thorgal for posting. It printed perfectly with no effort.

If you want permanent mounts that can hard mount the cyclone to the wall checkout the other remixes on thorgal's post.