1/4" Socket Bar Evo

Thank you BubsBuilds

I ride a Kawasaki KLR 650 so I need a place for a 12mm socket, as well as the standard set, so I made Socket Bar 10.
I also needed a 10 location bar for driver sockets so I made Socket Bar 10 Close.
Everyone needs a place to store 10 extra 10mm sockets, due to their ability to hide/evaporate, so 10 X 10mm was born. I took no picture of the 10 X 10mm because they are already lost...JK. Actually, I haven't printed yet, so results may very.

Remixed using TinkerCad

Print info
Printer- Elegoo Centauri Carbon
Material- PETG CF
Layer height- 1.4mm
Fill- 50%