Chevy Sonic Mystery Slot Phone Holder

This is bracket for a phone holder to fit in the mystery slot in a Chevy Sonic (and possible some other models). The mystery slot is a slot on the instrument panel below the radio and heater controls. I think it is for toll road tickets or an ID card or something. This bracket will snap right in and should hold up a phone or similar device. I tested it in a 2013 Chevy Sonic, it may fit other years or model but I don't know.

I have uploaded one model with no attachment, to which you can add whatever you want.

I have uploaded another part with a starter tube for PETGore's Flexible Smartphone Holding Arm, found here: https://www.thingiverse.com/thing:4234638. You can visit his page for the other parts of the Flexible Smartphone Holding Arm.

Update, I have added the phone and charger holder. This top part will snap on to the tube from Flexible Smartphone Holding Arm. The part is designed around my Google Pixel9 phone with case, and this wireless charger available on Amazon. (https://www.amazon.com/Wireless-Charger-Charging-Android-Samsung/dp/B0DCFRJ99Q)
Somehow I can't find a picture of the completed phone holder but it works pretty good. The PhoneMountFront and PhoneMountBack are screwed together with four #4x1/2" flathead wood screws.

The tubes from PETGore's Flexible Smartphone Holding Arm have to be very tight, because the phone and charger is heavy and the car is shaking and bouncing, and they tend to get loose. I might look for a different solution for the tube attachment.

This model is an original design by me, except for the tube from the Flexible Smartphone Holding Arm.

I printed the insert bracket on it's side to take advantage of layer strength. It will require supports, no matter which way you rotate it. Using a .4mm nozzle and .2mm layers works fine. I used PLA but you can probably use almost anything you want.

This is designed in Tinkercad, and I can make those projects available if someone wants them.