Open Lamp

Open Lamp is an open-source lighting project made from plywood components and 3D-printed parts, designed to be affordable, accessible and endlessly customisable.

Here's all the materials needed to build it:

3D Printed:

1. All Base Connectors (Base A - D)
2. All Mid Connectors (Mid A - D)
3. Lampshade
4. Bulb Socket Holder

Off The Shelf:

1. 10 X 2mm Craftwood Panels : https://www.amazon.co.uk/dp/B0BW44SDCS?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_2&th=1
2. G14 Bulb Socket: https://www.amazon.co.uk/dp/B092SG2KF7?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_3
3. G14 Bulb: https://www.amazon.co.uk/dp/B0D3M2G48B?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_1&th=1
4. Wires: https://www.amazon.co.uk/dp/B0DH5ZYV2N?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_4&th=1
5. Socket Plug: https://www.amazon.co.uk/dp/B0C2V8LMX4?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_1&th=1

Best to buy whatever's available for your location! Hope this gives the some reference.

Instructions:

1. Do refer to the step assembly file to look at how it all goes together and how the wood panels are cut. I've provided a 3d printed stencil to create the right shapes for the wood to be cut if you're cutting them by hand. (which is what i did).

2. Refer to .3mf file to see how the connectors are printed. No supports are needed.

3. And finally here's the tutorial to build the lamp once all things are prepped:

https://www.notion.so/OPEN-Lamp-Instructions-201c902247e18052a803c4222adfaf6f?source=copy_link

TBD - Will create a manual for how to create each part exactly!