Summary

N scale ranch house measures 165mm x 89mm x 48mm

Post-Printing

Ranch style house for N scale.

            <div><p>Use supports on everything except the Overhead garage door and windows. There are no windows for the sunporch. The area was just to small to put windows in. The sunporch is positioned on how it should be printed already. I use tree supports everywhere with 10% density.<br>Regular PLA was used with all parts at 20%</p></div>

How I Designed This

assembly Instructions

            <div><ol><li>install windows and doors on the main shell</li><li>Install the overhead garage door onto the main shell, by locating the hole indent on each side of the garage opening. The door needs no glue as it will open and close freely.</li><li>Add the roof to the main shell.</li><li>Install the sunporch to the back of the main shell. </li></ol></div>

N-Scale Ranch House