Harbor Freight, 20 ton press, side shims

Shims for the HF 20 ton press to eliminate slop when the jack plate moves.

These shims are meant to be screwed in place - there are 5 places for 10-24 csk srews to be used.
These could also be held in place with 2x sided tape, if it's thin enough.

Shims are 11.25" x 3.75" x 0.1875" thick and fit my press perfectly - there is ZERO side-to-side play with these installed, and the arm moves freely up and down when the jack is operated.

I printed these pretty much solid in PETG material.