Husqvarna 701 front brake bleeder adapter flange

I needed a flange adapter to bleed my Husqvarna 701 front brake and I made one.
The workshop manual states that you need to bleed the front brake pumping fresh brake oil (at 2.5 bar) and forcing the old one out the bottom bleeder nut.
The flange has a 1/4 gas thread hole where to fit a 1/4 pneumatic quick connector using some teflon tape around the threads to seal them.
To seal the gap between the flange and the reservoir I cut a piece of a bicycle inner tube to follow the shape of the reservoir.
The screw holes are not symmetric, as the ones of the Brembo reservoir, you'll see that there's an orientation that better covers the reservoir.
Before using it can be useful to have a look at Speelbird's video on youtube here: https://www.youtube.com/watch?v=axUVky8KY_M

Print with PETG or another DOT4 oil resistant filament.

Tested print settings:

• Printer: Creality Ender 5 pro
• Layer height: 0.12 mm
• Walls: 12
• Bottom layers: 20
• Top layers: 10