Guerrilla Gravity bearing press

Bearing presses for the seatstays on a GG Trail Pistol.
There's a cup and drift for the both the 6901 SM and 6900 with notches cut out to get around the shape of the seatstay.

The inner hole is 8.5mm to fit the common bearing presses that are available. Just put the cup on the outside, the drift on the inside and press it from the inside into the cup with a standard bearing press.

I printed in PETG @ .20 with full walls and full top and bottom and it'll be solid enough to press out everything a couple of times.