Greenworks battery 40v to Ryobi adapter

The Ryobi fit is inspired by this one https://makerworld.com/sv/models/845391-ozito-18v-pxc-to-ryobi-36v-40v-battery-adapter#profileId-792429 but draw my own version.

All prints need support material, I printed in Petg with PLA as support.

Material
6pcs M2.5 heat insert, the holes are 6mm deep so choose the length you want.
6pcs M2.5 x 8 mm screws, max 2.4mm high head.
6pcs M3 heat insert, holes are 7mm deep.
4pcs M3 x 8 screws, max 2mm high head.
2pcs M3 x16 screw

Printed with bambulab H2D with 0,12 layer high, probably not necessary but I was in no hurry

I made the contact plate from 1mm thick aluminum since that's what I found at home.
A template for the contact plate is available as a model.