Front rim and dew shield for GSO/TSO 8"

This is the frontal rim that I'm using on my TS Optics UNC 8". It has 6 internal threads for a cover or for a dew shield.

The rim should be printed in the stiffer material your printer can use - in my case, PET-CF. The other parts can be printed in any material - I used PETG.

Attach the rim to the front of the telescope with 6x M4 screws and nuts.

Note that I printed the cap in two colors: a black layer at the bottom (invisible on the picture) and the rest in red, to match my telescope. Can be printed in any color.