Wurkkos HD10 Bezel Removal Tool

This is a tool that allows you to unscrew the bezel on a Wurkkos HD10 right angle flashlight.

It can be used with a 1/4" drive ratchet, open ended wrench, or with the included finger wrench.

Files:

• HD10-bezel-tool-12mm-wrench.stl - Bezel tool with the outer square fitting a 12mm open-ended wrench
• HD10-bezel-tool-half-inch-wrench.stl - Bezel tool with the outer square fitting a 1/2" open-ended wrench
• 12mm-finger-box-wrench.stl - Optional print that fits over the 12mm version of the tool so you can turn it with your fingers. Can be easily glued to stay permanent.

Recommended Print settings:

• PLA or PETG
• 20% Infill
• No supports needed

I used a Prusa i3 MK3S+ on a 0.2mm SPEED preset with PETG for the photos

The tool was designed in OpenSCAD, you can find the files here: https://github.com/bhatasaka/hd10-bezel-tool
If you need the tool to fit another sized wrench or tool, you can also edit the size of the outer square very easily. Follow the directions in the readme.