BMW E9x clutch and break pedal bushing

Bushing model for clutch and break pedal for BMW 3 series cars such as the E90, E91, E92, E93 and most variants. I got the dimensions from this post

I included two variants. One with a slit, like the original, and one without. The slitted one might be easier to install, however

Make sure to check the inner and outer dimensions after you finish your print, they should be exactly 14mm and 18mm respectively. Adjust your slicer settings such as "Hole horizontal expansion" (Cura 5.8.1) to account for your printer's characteristics. For a video explaining this, look for "High tolerance prints on a budget printer | Kingroon KP3S Pro" by RoTechnic on YouTube.

Also, this part can wear so maybe assemble with some grease on the inside of the bushing for a longer life, or print with low-friction materials.