Watch Winder DYI ardunio
🔧 Watch Winder DIY con Arduino (Impresión 3D)
He diseñado y construido este watch winder casero utilizando Arduino y piezas impresas en 3D, como alternativa a los modelos comerciales que suelen ser bastante caros.
El objetivo del proyecto es mantener relojes automáticos en funcionamiento de forma sencilla, económica y personalizable.
⚙️ Características
- Diseño compacto y funcional
- Compatible con relojes automáticos estándar
- Control mediante Arduino
- Bajo coste (aprox. <20€)
- Piezas imprimibles en 3D
- Fácil de montar
🛠️ Materiales necesarios
- Arduino (Nano / Uno)
- Motor (stepper o DC con reductora)
- Fuente de alimentación
- Driver de motor (si usas stepper)
- Tornillería básica
- Reloj automático
🖨️ Impresión 3D
- Material recomendado: PLA
- Altura de capa: 0.2 mm
- Relleno: 20–30%
- Soportes: según pieza
(Las piezas están diseñadas para imprimirse sin complicaciones, aunque algunas pueden necesitar soportes)
🔌 Montaje
- Imprime todas las piezas
- Ensambla la estructura
- Instala el motor en su soporte
- Conecta el sistema al Arduino
- Ajusta el código según tus necesidades
💻 Código
El Arduino controla la rotación del motor para simular el movimiento natural de la muñeca.
👉 Código disponible aquí:
https://scented-pluto-2fb.notion.site/guallota-66e4c78afab78334be7f813309362619?p=34a4c78afab780aaad36dbad54ff8be9&pm=c
⚠️ Notas
- Asegúrate de ajustar la velocidad de giro para no dañar el reloj
- Puedes modificar el diseño para adaptarlo a diferentes tamaños
- Proyecto pensado para uso personal / aprendizaje
🚀 Mejoras futuras
- Pantalla para control
- Configuración de velocidad y ciclos
- Alimentación portátil (batería)
- Control mediante app
📩 Feedback
Si mejoras el diseño o haces una versión propia, ¡me encantaría verla!
Puedes dejar un comentario o compartir tu remix 🙌
🎥 Vídeo del proyecto
👉 https://www.youtube.com/watch?v=nhl1CzTTbE0
🔧 DIY Watch Winder with Arduino (3D Printing)
I designed and built this DIY watch winder using Arduino and 3D printed parts as an alternative to commercial models, which are usually quite expensive.
The goal of this project is to keep automatic watches running in a simple, affordable, and customizable way.
⚙️ Features
- Compact and functional design
- Compatible with standard automatic watches
- Arduino-based control
- Low cost (approx. <20€)
- Fully 3D printable parts
- Easy to assemble
🛠️ Required Materials
- Arduino (Nano / Uno)
- Motor (stepper or DC with gearbox)
- Power supply
- Motor driver (if using a stepper motor)
- Basic screws and hardware
- Automatic watch
🖨️ 3D Printing
- Recommended material: PLA
- Layer height: 0.2 mm
- Infill: 20–30%
- Supports: depending on the part
(Parts are designed to be easy to print, although some may require supports)
🔌 Assembly
- Print all parts
- Assemble the structure
- Install the motor in its mount
- Connect the system to the Arduino
- Adjust the code as needed
💻 Code
The Arduino controls the motor rotation to simulate natural wrist movement.
👉 Code available here:
https://scented-pluto-2fb.notion.site/guallota-66e4c78afab78334be7f813309362619?p=34a4c78afab780aaad36dbad54ff8be9&pm=c
⚠️ Notes
- Make sure to adjust the rotation speed to avoid damaging the watch
- You can modify the design to fit different watch sizes
- This project is intended for personal use / learning purposes
🚀 Future Improvements
- Display for control
- Adjustable speed and rotation cycles
- Portable power (battery)
- App or wireless control
📩 Feedback
If you improve the design or create your own version, I’d love to see it!
Feel free to leave a comment or share your remix 🙌