Mini X Quadcopter
Update:
I finally got around to updating this on thingiverse. I have made a bunch of changes but the main ones are:- Redesigned the scad code for the body which makes it easier to make changes.
- Reinforced the arm holding brackets to prevent them from breaking.
- Removed the antennas. Thread the antenna wires through the holes in the top of the body instead.
- Added arms that have a 15 degree angle to move the motors out of the camera picture while flying FPV
- Added holes for screwing the naze32 onto the frame instead of using double sided sticky foam
- Various other changes
A RC quadcopter frame designed for 2300kv motors and the naze32 flight controller. Perfect for line of sight flying in the back yard. Or FPV if you strap the camera on along with the battery. Works even better if you use the angled arms that I have added. I designed the frame to make it easy to replace arms if you break them. Simply unscrew four screws, take out the old arm and slide the new one in.
A build log can be found here http://imgur.com/a/DRlkk and the openSCAD code for the models can be found on github https://github.com/TheZoq2/Mini-X-Quad