Screw Adjustable Z Endstop Bracket for Prusa Mega

This is a simple 2 piece bracket to adjust Z Axis height for the endstop.

• No support material
• 25% infill
• Slower speed to acheive a nice vertical rod on P2

Needed Parts:
2 - M3 x 20mm Screws
1 - M3 x 40mm+ Screw (I prefer Allen Socket, but you could use any)
3 - M3 nuts
1 - Pusher Spring (I used a 5 mm pusher, but you could use a spring from a pen as well)

You'll to attach the endstop pin to P2 in the desired orientation and the bracket to the desired location on the printer, then the long screw which you'll use to adjust the height in the middle of both parts, using the spring to provide resistance between the to parts.