Talon X-UAV Mobius Camera Dome Mount

Printed in PLA, this mounts the Mobius camera and an FPV camera inside the clear dome. The Mobius is supported on #35 Durometer rubber isolators and a 3mm Align PU Gel pad.

This was designed to fit the Talon V2 airframe. I don't know how it fits on the later versions.

The FPV camera used, a Seawolf Pixma, has 33mm hole spacing and the bushings are from Menards Hardware here:

http://www.menards.com/main/tools-hardware/fasteners-fastener-accessories/specialty-fasteners/bushings/1-4-x-3-4-bushings-8-pcs-box/p-1654539.htm;jsessionid=96ABF92AE82E7AAE794E6F4DBCA31B20.eklka-prodapp5-external-mcom