Summary

Landing gear for the Poly or the CF frame.

Instructions

You can use the small bolts that come with the stock landing gear, but I prefer 4" x 3/32" zip ties. The best part about this is that you can pick your color(s) or use clear if you're sporting 4 LEDs on the corners of the Poly frame.

Also, if you print it in clear and zip tie it between the inner hole and the large cut out for the LED, the leg will glow as well as the poly frame.

I've added three .stl files. 35mm, 55mm, and 74mm long legs. All are thicker (read "stronger") than the original. So, if you find the original file is too weak for your liking, you'll be a lot happier with one of these three new ones.

It seems that some slicers have problems with the feet on the last three legs that I had uploaded. I ran them through Netfabb and added the three fixed files as well. I'd recommend using the files with "fixed" at the end of the file name...

EOX Landing Gear