Summary

Part one of two of a wedding present.
Inspired by Japanese Cherry Blossom Paintings

Instructions

Printing Instructions
1) PLA at 205˚C Heated Bed at 50˚C
2) Layer height of 0.1mm
3) Printed reeeeeeeeeaaally slowly (Max speed 70mm/s with outlines ~20mm/s)
4) Printed at a extrusion width of 0.3mm
5) 4 shells (outline and top/bottom)
6) Switch filament color at 0.4mm height

~This was the hardest print I've ever attempted~
Time: ~11 hours

.STL
Basic print file - two parts
Part 1: The base part of the painting frame and tree outline
Part 2: Cherry Blossoms (will overlap with Part 1 model)

.factory
Simplify3D file that has all the print settings and model pre-setup. The Settings should match the "Printing Instruction"

.mix
MeshMixer file of .STLs Part 1 and 2 for your editing pleasure

.SLDPRT
Original Solidwork file used to create Part 1 .STL file for your editing pleasure

.gcode & .3xg
The print-ready files used to print the model. Should match the "Printing Instructions" settings for PLA. Requires Sailfish firmware.

Japanese Cherry Tree Painting - Horizontal