Traxxas Front Bulkhead for 1/10 2wd models

Update 5/12/2015: Did some bashing with the Traxxas Stampede and had a breakage at the front A-Arm mount. Re-printed in new direction and so far no breakages. Im sure it was because of the direction i printed it in. I highly recommend printing in the direction I created the .STL file in.

Had to re-size and move alot of the holes to make a model that would bolt in a stock piece location and work. Front A-Arms rubbed on the plastic in the original model and fixed that. Alot of holes were to small on original model and would snap when forcing bolt in :). Now you should be able to print and have a working piece straight from the printer.

Setup:

Hacked Davinci with repetier firmware loaded and RepetierHost
Stock .4 nozzle and .4 layer width