The jacksepticeye

UPDATE 25.02.2016:
I have now fixed one of the issues kind of, so now you can split objects in multiple parts without getting the issue where the tail fall of. So now you don't need to print a complete set of the green color but rather split them up in the slicer and delete the ones you don't need ;) I am really sorry that it took me that long to fix.
use the JackSepticEyeUnionV7

IMPORTANT: Due to scaling problems in the software I am using I had to export all pieces into one STL file, this means that in order to print out the eyeball you have to print out a complete sett at first. I am sorry for the issue this might cause, after doing this you have to separate the models from each other and deleting the once that's not needed, I printed my model in 0.15 scale. I have not been able to fix this problem and I am really sorry for this.

I decided to make a four piece 3D-Model of the logo of the ever so famous youtuber jacksepticeye, and here it is. Set contains of 1 stand, 1 eyeball 1 iris and 1 pupil. It should be minimum of clean up required in order make the pieces fit, and the pieces will often fit without the need for any glue, but this is Depending on your printer settings and quality
The model is a medium poly model.

Hope you enjoy it! and I might be making a new version later.
Also, if you would like you can see the actual printing of this model here: https://youtu.be/QYKPTqDdLvg

Please read and consider: all my contentand designs are for every one to use free off charge so If you like my design/models/content please consider to give a donation by pressing: Here