Summary

Clamp for desk lamp/magnifier. SCad file and STL

Someone gave me an old desk lamp with magnifying glass
but it didn't have the clamp on base. So I designed and printed one, and here it is.

Instructions

I used Slic3r make my gcode.
I found printing it at 60% with honeycomb and 8 solid layers
at .25mm worked best for my printer.
The final print was done with the clamp in an upright position with support. This made it stronger than laying on its side.

I used an M8 nut and bolt, you will need to adjust all the sizes for your purposes.