y belt holder vertical for prusa i3

wilson ts y belt is by default oriented such that the teeth is perpendicular to x-y plane. I made this because I'm changing out the MDF board to aluminum carriage which comes with three SCV8UU and two holes in the center of the carriage 41mm apart to attach the y belt holder.

So I modified this vertical belt holder labeled as "ytable-8mm.stl" from mjrice link to that stl here: https://github.com/mjrice/wilson/commit/15bbdde62b79b8b839b46344a24383e9eda49e3a

I removed the rest of the table and leaving just the belt holder and added 41mm apart holes to attach to aluminum carriage

here's the amazon link to the aluminum y carriage I bought. Note that the printed part included has the teeth facing down perpendicular to y-z plane so this part is useless for wilson ts setup
http://www.amazon.com/gp/product/B00THZJHJY?psc=1&redirect=true&ref_=oh_aui_detailpage_o07_s00

Update1:
I also added "y belt holder offset.STL" if you use wilson ts, this offset is necessary so that the belt is aligned properly with the GT2 pulley and y tensioner