ZMR 250 Lipo Voltage alarm Mount

Slips on over the rear or front posts.

Can't fit 6" props unless you put the volt meter on the inside. 5" fit and are shown in pictures.

A few files included.. the Moment of Inspiration files, and the stl files.

the STL's are marked _25mm, _30mm, _32mm

Which corresponds to how tall it is. I didn't make it the full 35mm because of the screw heads and the zip tie I have.

Pictures are of the 32mm tall one.

I am personally using the 25mm one with a FrSky voltage telemetry sensor and it stays put.